BHDPT - TT-P-24E TYPE III, GRAY 26440
- MSDS: BHDPT
- Manufacturer: TRIAD PAINT AND CHEMICAL CORP
- Product Name: TT-P-24E TYPE III, GRAY 26440
- National Stock Number: 8010-00-598-5154
Product Identification
Product ID:TT-P-24E TYPE III, GRAY 26440
MSDS Date:07/24/1989
FSC:8010
NIIN:00-598-5154
MSDS Number: BHDPT
Responsible Party
BROOKLYN, NY 11207
US
Emergency Phone: (718) 443-2778
Info Phone: (718) 443-2778
Cage: 33151
Contractor
Telephone: 201-437-6501
Cage: 33151
Ingredients
NO HAZARDOUS INGREDIENT
RTECS: 9999999ZZ
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:VAPORS MIGHT BE IRRITATING TO EYES,NOSE, AND
THROAT. EXCESSIVE EXPOSURE MAY RESULT IN HEADACHES, DIZZINESS,
AND NAUSEA. DEFATTING OF SKIN.
First Aid
First Aid:INHAL: PROVIDE FRESH AIR AND TEST. SKIN: WASH AFFECTED AREA
W/SOAP AND WATER. INGST: DO NOT INDUCE VOMITING. DRINK ONE OR TWO
GLASSES OF WATER TO DILUTE. SEE A PHYSICIAN. EYES: FLUSH W/RUNNING
WATE R FOR 15 MINUTES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:105F/41C
Lower Limits:6.0
Upper Limits:1.0
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARTUS. TO AVOID INHALATION OF SMOKE OR VAPORS. DO NOT
USE WATER.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT,ELECTRICAL EQUIPMENT,
SPARKS, & OPEN FLAMES.
Accidental Release
Spill Release Procedures:VENTILATE AREA. REMOVE ALL SOURCES OF
IGNITION. PICK UP SPILL IMMEDIATELY W/INERT ABSORBENTS.
SAFELY DISPOSE OF SATURATED ABSORBENTS BY IMMERS- ING IN WATER.
WEAR PROTECTIVE CLOTHING DURING CLEAN UP.
Handling
Handling and Storage Precautions:AVOID OPEN FLAME AND SPARK SOURCES.
PROVIDE ADEQUATE VENTILATION. AVOID EXCESSIVE HEAT.
Other Precautions:DO NOT TAKE INTERNALLY
Exposure Controls
Respiratory Protection:ORGANIC CANNISTER MASK OR AIR PACK IF
VENTILATION IS INADEQUATE.
Ventilation:LOCAL EXHAUST IS RECOMMENDED
Protective Gloves:NEOPRENE RUBBER GLOVES
Eye Protection:CHEMICAL SAFETY GOGGLES
Supplemental Safety and Health
NK
Chemical Properties
Vapor Pres:100F
Vapor Density:5.0
Spec Gravity:1.645
Evaporation Rate & Reference:.13
Solubility in Water:NEG
Appearance and Odor:GRAY COLOR LIQUID HYDROCARBON ODOR
Percent Volatiles by Volume:37.3
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS STRONG ACIDS.
Stability Condition to Avoid:WARM STORAGE AND IGNITION SOURCES
Hazardous Decomposition Products:CO, CO2, SMOKE, TOXIC VAPORS, FUMES
Disposal
Waste Disposal Methods:DISPOSAL METHODS MUST COMPLY WITH FEDERAL,
STATE, AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.